Cut To Length Machine with 4Hi leveler

NO. OF SHEETS PER MIN. FOR SERVO DRIVE
10-12 PCS X 2,000 MM. LONG
LENGTH TOLERANCE
± 1.0MM.

Machine Details

PAY-OFF REEL WITH HYDRAULIC EXPANSION
LENGTH OF MANDREL
1,219 MM.
EXPANSION/COLLAPSE SYSTEM
BY HYDRAULIC ROTARY CYLINDER FITTED WITH THE MAIN SHAFT.
EXPANSION RANGE OF THE MANDREL
475 MM. DIA. - 515 MM. DIA. MANDREL
BODY CONSTRUCTION
M.S. FABRICATED BODY WITH EN-8 MAIN SHAFT MOUNTED ONTHE BEARING.
LOADING CAPACITY
10,000 KGS.
MANDREL ROTATION
BY LEVELLER
4-HI ROLLER LEVELLER
FUNCTION
TO FLATTEN THE SHEET
BOTTOM PINCH ROLL SIZE
120MM. X 1,320 MM.
TOP ROLL SIZE
200 MM. X 1,150 MM.
PINCHING SYSTEM
BY AIR CYLINDER
PINCH ROLL MATERIAL
BOTTOM ROLL
EN8 ROUND WITH SURFACE HARDENED
TOP ROLL
EN8 ROUND WITH 8MM THICK RUBBER LINING
PINCHING SYSTEM
BY AIR CYLINDER
NO. OF LEVELLER ROLLER
13 - 19
SIZE OF LEVELLER ROLLER
60MM. DIA. X 1,320MM. LONG
NO. OF BACK UP ROLLER
15 - 21
SIZE OF BACK UP ROLLER
75MM. DIA. X 100MM. LONG
HEIGHT ADJUSTMENT
BY WORM GEAR BOXES
INPUT POWER
11 KW A.C. V.V.V.F. GEARED MOTOR
DOWN CUT SHEAR
TYPE OF SHEAR M/C
MECHANICAL DOWN CUT SHEAR ACTUATED BY CLUTCH BRAKE MOTOR
BODY MATERIAL
M.S. PLATE STRUCTURE, FABRICATED.
CUTTING RANGE
0.60 MM. X 1,219MM.( MAX. )
BLADE SIZE
20MM. THICK X 65 MM. (W) X 1,320MM.
BLADE MATERIAL
HIGH CARBON HIGH CHROMIUM TOOL STEEL
MOTOR INPUT
5.5 KW., A.C. PLANETARY GEARED MOTOR WITH CLUTCH BRAKE COMBINED UNIT.
AFTER ACHIEVING PRE-SELECTED LENGTH THE LEVELLER WILL STOP AND THE SHEAR WILL CUT THE SHEET. AFTER CUTTING OPERATION WHEN THE UPPER BLADE WILL GO UP AND SENSE THE PROXIMITY SWITCH MOUNTED ON THE SHEAR FRAME, THE LEVELLER WILL AGAIN START TO FEED THE PRE-SELECTED LENGTHOF SHEET
HEIGHT ADJUSTABLE PILING TABLE
TYPE
STATIONERY TABLE TYPE
TABLE SIZE
1,220MM. X 3,800MM.(L)
CONSTRUCTION OF THE TABLE
MADE OF 150X75 CHANNEL
HEIGHT ADJUSTMENT
BY MECHANICAL SCREW JACK DRIVEN BY 0.75 KW A.C. PLANETARY GEARED MOTOR.
## PILING TABLE HEIGHT WILL BE ADJUSTED WITH THE HELP OF MANUALLY OPERATED LOCAL CONTROL BUTTON.
AIR COMPRESSOR
TYPE
PORTABLE AIR-COOLED SINGLE CYLINDER TYPE.
PRESSURE
MAX. 6-8 KG/SQ. CM.
MOTOR
2.2 KW
AIR LINE IS REQUIRED FOR FOLLOWING MACHINERY :
HOLDING ROLL UP / DOWN
1 CYL.
FEED ROLL UP / DOWN
2 CYL.
PINCH ROLL
2 CYL.
HYDRAULIC POWER PACK
ELECTRIC CONTROL PANEL

LIST OF MOTORS

PAY-OFF REEL(UNCOILER)            5.5 KW
7.5 KW
ROLLER LEVELLER                        11.0 KW
36 NM.
SHEAR                                              5.5 KW
3.7 KW
PILER                                               1.5 KW
0.75KW.
HYDRAULIC POWER PACK           3.7 KW
3.7 KW.
COMPRESSOR                               2.2 KW
2.2 KW.